MicroStar Pulse Precise Series Pulse Power Supplies

  • Microprocessor-based controls for accuracy and repeatability
  • MicroStar Pulse Series soft-touch keypad and digital displays
  • DC to 5,000 Hz pulses
  • Minimum pulse width: 0.1 millisecond on, 0.1 millisecond off
  • Set peak currents, read back average currents
  • Selectable pulse timing resolutions
  • Typical pulse rise and fall times: <50 microseconds="" li="">
  • Minimum suggested setting: 10% of maximum peak current rating
  • Regulation accuracy: +/- 1% of setting or 0.1% of peak rating, whichever is greater
  • Ripple: <1% RMS of maximum rated output voltage
  • Selectable current, voltage or cross-over regulation modes
  • Output voltage and current tolerance limit settings with alarms
  • Ampere time and real time cycle control via front panel
  • Resettable ampere time totalizer with password protection
  • Selectable ampere time and real time counter resolutions
  • Audible alarm for end-of-cycle and out-of-tolerance conditions
  • Save/Recall/Delete settings feature (Up to 10 saved setups)
  • Front panel calibration control
  • Built in fault detection for over-temperature and AC power failure conditions
  • RS485 Serial control standard on all models
  • Windows-based control program
  • Convection cooled via rear mounted heat sink
  • Sealed design protects power supply from harsh environments
  • Powder coated aluminum enclosure 5.85" x 12" x 13.5" (HWD)
  • Flip down bail for easy bench top use
  • Field selectable 110VAC or 220VAC single phase input
  • CE Approved

 Options

  • Recipe control -links up to 8 of your saved setups into a recipe. Includes setup looping capabilities
  • Output ramp timer - ramps output up to a desired set point over a user-selected time period
  • Auxiliary ampere time totalizer with relay output. Great for chem-add systems!
  • Analog Interface for PLC control (4-20 mA, 0-5 volt or 0-10 volt signals)

 

MicroStar Pulse Precise Series Size Chart

Model

Voltage

(DC)
Average Current
or Maximum DC
(Amps)

Peak Current

(Amps)

Volt Meter

Resolution

Amp Meter

Resolution
DuP 10- .1 - .3 0 - 10
0 - 0.1
0 - 0.3
0.1
0.1 mA
DuP 10- .5 - 1.5 0 - 10
0 - 0.5
0 - 0.5
0.1 1 mA
DuP 10- 1 - 3
0 - 10
0 - 1
 0 -3 0.1 1 mA
DuP 10- 3 - 6
0 - 10
0 - 3
 0 -6 0.1 0.01 A

Specifications subject to change without notification

 

More Information>>